Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Santa Rosa?
A chimney liner replacement in Santa Rosa typically costs $2,400 to $6,800, and a partial flue rebuild usually lands between $1,800 and $9,500. Most homes we look at need one or the other, not both, and a HeatShield ceramic resurfacing often replaces a full reline at the lower end of that range. The exact number depends on flue length, liner material, and how much of the existing masonry has to come out.
We’re a chimney specialist, not a generalist with a brush. We inspect it, clean it, and fix it – same company, same standard of work. That matters here because the difference between a $400 repair and a $6,000 reline usually comes down to one measurement taken during an inspection.
Key Takeaways
- Standard stainless reline: $2,400 to $4,900 for most single-story Santa Rosa homes.
- HeatShield ceramic resurfacing: $1,600 to $3,200, an alternative when the flue is sound but pitted.
- Partial flue rebuild or crown repair: $1,800 to $9,500 depending on how much masonry is removed.
- Inspections and sweeps cost far less than repairs and tell you which one you actually need.
- Estimates are free. Call (888) 919-0637 to schedule one.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the numbers break down for a typical Santa Rosa job. These are estimated ranges for the local market, not fixed prices. The written estimate you receive after inspection sets the final price.
| Line item | Typical range | What it covers |
|---|---|---|
| Level 1 & 2 chimney inspection | $150 – $475 | Visual and camera inspection, written report |
| Standard sweep | $175 – $350 | Removal of creosote and soot from flue and firebox |
| Stainless steel liner (per foot installed) | $32 – $65 | DuraFlex or Copperfield liner, insulation, cap, top plate |
| Full liner replacement (typical home) | $2,400 – $4,900 | Reline of a standard single-flue chimney |
| HeatShield ceramic resurfacing | $1,600 – $3,200 | Ceramic resurfacing of a deteriorating but structurally sound flue |
| Crown repair or rebuild | $500 – $1,800 | Sealing cracks or rebuilding a failed crown |
| Partial flue rebuild (upper section) | $1,800 – $5,500 | Removal and rebuild of damaged flue tile and surrounding masonry |
| Full flue rebuild with new liner | $6,500 – $9,500 | Masonry rebuild plus liner installation |
| Chase cover or top damper | $350 – $1,200 | Weather sealing at the top of the chimney |
What drives cost up in Santa Rosa: flue height, since taller chimneys need more liner material and more time on a ladder; the condition of the flue tiles, because cracked or spalling tile often means a rebuild rather than a simple reline; liner grade, with heavier-gauge stainless and insulated wraps costing more; access, since a chimney on a steep roofline takes longer to work around safely; and whether a wood-burning stove insert needs a dedicated liner sized to the appliance. What keeps cost down: catching the problem early with an inspection, resurfacing the flue with HeatShield instead of replacing it, and having standard materials on hand rather than waiting on a special order.
What Affects Chimney Liner & Rebuild Pricing in Santa Rosa
Pricing in Santa Rosa follows the same logic as anywhere else in the region, but a few local realities move the number.
- Fireplace use in Santa Rosa’s climate. Winters here are mild, so many fireplaces get used in bursts rather than daily. That sometimes means less creosote buildup than a colder climate, but it can also mean a chimney sits unused for long stretches and slow water damage goes unnoticed. A flue that looks fine from the firebox can be pitted well up the stack.
- Housing stock. Santa Rosa has a wide mix of older homes with original masonry chimneys and newer builds with factory-built units. Older masonry chimneys often need either HeatShield resurfacing or a full reline. Factory-built units need a liner matched to the appliance, which is a different job with a different price.
- Flue length and roofline. A single-story ranch with a straight flue takes far less material and time than a two-story home with a steep roof. That difference alone can move a reline by a thousand dollars or more.
- Degree of masonry damage. Cracks in flue tile, spalling brick, and a failing crown all change the scope. A rebuild that requires removing and replacing flue tiles costs substantially more than a liner dropped into an intact flue.
- Liner material and brand. We stock and install professional-grade systems from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. Material grade (gauge, insulation, cap style) is a genuine cost variable, and the right system depends on the appliance and the flue’s shape.
- Wood-burning stove or insert. An insert often needs a dedicated liner sized to the appliance, plus a block-off plate and top termination. That’s more work than a straight liner for an open fireplace.
One point worth making plainly: a chimney inspection that gives you a real answer, not just a receipt, is what separates a fair price from an expensive surprise. We inspect, clean, and repair under one company. There’s no handoff to a separate contractor, so the person who diagnoses the flue is the one who prices the work.
How to Save on Chimney Liner & Rebuild
The single biggest saving in this work is catching a failing flue before it needs a rebuild. Here’s what actually helps.
- Get an inspection before the problem is obvious. A Level 2 inspection runs a fraction of the cost of a reline and tells you whether you need a sweep, a resurface, or a full liner. Skipping it and guessing usually costs more.
- Ask whether HeatShield resurfacing is an option. When the flue is structurally sound but simply worn, ceramic resurfacing restores it at a lower cost than a full reline. It’s a specialty service beyond standard sweeping, and it’s worth asking about directly.
- Fix the crown early. A cracked crown lets water into the flue, and water is what turns a small repair into a rebuild. A $500 to $1,800 crown repair now can prevent a $6,500 rebuild later.
- Have the work done in one visit when possible. Since we carry DuraFlex and Copperfield liner systems, the repair decision can be made and executed without a return trip waiting on a special order.
- Get a written estimate and compare scope, not just price. Two quotes for a “reline” can cover very different work. Ask what liner material, what insulation, and what cap are included.
Estimates are free, and the price is set per job by the written estimate. Call (888) 919-0637 to book one. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Santa Rosa?
A standard stainless steel liner in Santa Rosa typically costs $2,400 to $4,900 installed, or roughly $32 to $65 per foot including insulation, cap, and top plate. Full flue rebuilds with a new liner run $6,500 to $9,500. Call (888) 919-0637 for an exact quote – estimates are free.
Is it cheaper to reline or rebuild a chimney?
Relining is almost always cheaper. A reline runs $2,400 to $4,900, while a partial flue rebuild costs $1,800 to $9,500 and a full rebuild with liner runs $6,500 to $9,500. The deciding factor is whether the existing flue tile is sound enough to hold a new liner. A camera inspection tells you that, and sometimes HeatShield ceramic resurfacing at $1,600 to $3,200 saves a rebuild entirely. Call (888) 919-0637 to find out which category your chimney falls into.
Can you come out today for a chimney inspection in Santa Rosa?
Same-day service is often possible when you call early. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. An inspection runs $150 to $475 and gives you a written report you can use for insurance or a real estate transaction. Call (888) 919-0637.
How long does a chimney reline take?
Most standard relines take a single visit, roughly three to six hours depending on flue height and roof access. A full rebuild with a new liner takes longer, sometimes spread over more than one visit. Your written estimate will state the expected scope. Call (888) 919-0637 to schedule.
Do I need a chimney inspection before a reline?
Yes. An inspection, typically $150 to $475, is what determines whether you need a reline, a resurface, or a rebuild. Without it, a quote is a guess. We offer inspection as a formal standalone service, useful for real estate transactions, insurance compliance, and annual safety checks. Call (888) 919-0637 for a free estimate on the inspection.
If your fireplace is more than a decoration, the flue behind it needs to be sound. Our technicians have up to 10 years of experience, and we work with the brands chimney specialists actually use. Whether you’re facing a straightforward reline or a rebuild you didn’t expect, call (888) 919-0637 for a free estimate. We answer 24/7, and dispatch runs from 7am to 7pm, Sunday through Friday.
Pricing reflects the Santa Rosa market as of 2026. Santa Rosa Chimney Cleaning offers free estimates – call (888) 919-0637.
What Our Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Norma Castillo"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Carrie Bennett"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Javier Guzman